How to Replace a Laptop Screen on Your Own

Initially, you need to determine if you desire a new screen. The diagnosis is easy. Connect a screen to your notebook via its video output dock to verify that the notebook’s other components still work. If the laptop functions properly, it is time to replace the screen. Please be careful. Laptop internal parts, wires and sockets are extremely vulnerable and easy to fracture, to rip off, or to brake. It is also a good idea to use some kind of organizer to organize anchoring screws by the steps of dis-assembly so that you can follow the process backwards order when assembling the display screen. Laptop Screen Repair

Before buying a new LCD, it is necessary to examine and possibly remove, the current one. It assistance to locate the necessary part numbers to make certain you get the exact model that is right replacement. For some laptops, you will need only a little Philips screwdriver and a really small flat-head screwdriver or a knife. Before you begin, disconnect the electricity and remove the laptop’s battery. 

Then, you need to discover the screw addresses. These small rubber features are typically found on the front of the display’s bezel (surrounding frame), though on some notebooks you might find some of the covers over the side of the display. Use the tip of a little flat-head screwdriver or knife to carefully pry back the corner of each rubber cover around the screen until you can observe if a screw is placed underneath. If you find a screw, take away the cover and place it in a safe location. In most cases, a display screen has from four to six screws on the bezel. After you have located them all, remove and store them with your covers.

When anchoring screws are removed, try to unsnap the bezel by inserting your fingers between the bezel and the screen. To unsnap the bezel, start at the bottom with most notebooks. Much force is not necessary but if you face difficulty, it is better to maneuver a little bit further and get one of these different spot. You may need to slide laptop lid latch to completely remove the bezel. In the event you are struggling to move the screen you might have to remove screws holding display screen brackets to the laptop screen lid. Watch away for cables and wire connections stuck underneath the display – such as of web-cam or wireless antenna – and make certain not to damage them.

Take away the screws in the metal bracket framing on either side of the screen. Place the display screen on soft cloth on its keyboard counterpart. You will notice a toned wide video cable. Take away a piece of video tape that keeps video cable television placed on the back of the screen. Pull the video cable connector away of the socket using finger nail. If you are just replacing the LCD screen (and continue to use the inverter) let it stay as is. However, if you are replacing the inverter as well, disconnect the energy cable and then unscrew the inverter.

When you open the screen, look for a label on the back showing the manufacturer’s part number. This kind of typically contains one or more letters, and then a series of numbers. To determine which screen models is compatible with your laptop or if you have difficulty identifying model number of your old screen, you may use some on-line illustrated guide.